Pool Tile Adhesive
Description
Description: Pool Tile Adhesive
Pool tile adhesive, based on cement and micronized minerals, modified with synthetic resins and special additives, with very high resistance to water and moisture, very high flexibility and the ability to withstand a wide temperature range and high adhesion strength, formulated and produced and can be used only by adding water. Pool tile adhesive is a suitable option for use in swimming pools, steam saunas, jacuzzis, fountains and all places that are in contact with water.
Features and benefits:
- High flexibility in wet environment
- No water absorption
- Moisture resistance
- Fast catch
- Produced for use in environments immersed in water
Application:
- Installation of ceramic tiles on the wall and floor
- Gluing ceramic tiles and natural and artificial stones
- Can be installed on all kinds of concrete, plaster and stone surfaces and…
- Can be used in a structure that has tension, expansion and contraction
Technical specification table:
| Color | White – Gray |
| State | Powder |
| Specific gravity | 1/65gr/cm3 |
| Chlorine Ion | Not have |
| Operational time | Maximum 60 minutes |
| Gel time | 20 minutes |
| Final drying time | 7 days |
Packing :
20 kg bag
Product Description – Pool Tile Adhesive
Pool tile adhesive is a product based on cement and micronized minerals that is modified with synthetic resins and special additives. It is also very resistant to water and moisture, has very high flexibility and can withstand a wide temperature range and is formulated, produced and marketed with high adhesive strength, and pool tile adhesive can be used only by adding water. Pool tile adhesive is a very good option for use in swimming pools, steam saunas, jacuzzis, water features and all places that are in close proximity to water. Also, using waterproof tile adhesive is suitable against vibrations and limited movements of the building due to its good flexibility.
In general, pool tile adhesive powder is used as a pool sealing mortar due to its high adhesive properties. In addition to its adhesive strength, this tile adhesive also has very high flexibility and is used for installing tiles in humid environments. The sealing properties of pool tile adhesive are such that in addition to being impervious to water, it also prevents surface water from entering to a large extent and acts as a two-way insulator.
Pool tile adhesive is a special type of adhesive formulated and produced for installing pool tiles and other surfaces that are constantly in contact with water. This adhesive has a very high resistance to water, humidity, chemicals found in pools and temperature changes. Pool tile adhesive can be used in various projects such as installing tiles in pools, bathrooms, saunas and other wet spaces and can be used as a reliable solution.
Pool tile adhesive packaging
20 kg bag
Pool tile adhesive consumption
The amount of pool tile adhesive used depends on the condition of the subfloor (porosity, unevenness, and tile grooves). Typically, 2.5 kilograms of pool tile adhesive is sufficient for 1 square meter.
Maintaining pool tile adhesive
Duration: Six months in original packaging.
Conditions: Away from cold and frost, heat and direct and prolonged sunlight.
Best storage temperature: +10 to +30 degrees
How to use pool tile adhesive
- Each 20-kilogram bag should be mixed with 5 to 6 liters of water using an electric mixer.
- Slowly add the powder to the water and mix until it becomes a smooth, homogeneous mortar.
- Let the mortar rest for 5 minutes and after a little mixing, it is ready to use.
- Using a notched trowel, apply the adhesive to the surface and install the tile in no more than 20 minutes.
Properties and effects of pool tile adhesive
- Extremely high strength, resistance and adhesion
- Easy to use and fast to execute
- Adequate flexibility against vibrations and limited building movements
- Excellent adhesion to old tile surfaces
- Moisture resistant
Application of tile adhesive for gluing pool tiles
- Suitable for installing ceramic tiles on walls and floors.
- Ability to bond ceramic tiles, natural and artificial stones
- Can be installed on all types of concrete, plaster, stone surfaces, etc.
- Can be used in a structure that has tension, expansion, and contraction.
Table of physical and chemical properties of pool tile adhesive
| Title | Feature |
| Mode | Powder |
| Color | White – Gray |
| Specific gravity | 1/65g/cm3 |
| Chlorine ion | No |
| Gel Time | 20 minutes |
| Workability time | Maximum 60 minutes |
Mechanism of action of pool tile adhesive
Pool tile adhesive is based on cement along with aggregates, water-reducing additives, polymeric materials, and chemical compounds, which are suitable for installing pool tiles in thin or thick layers.
Safety of pool tile adhesive
- The use of glasses and gloves is mandatory.
- In case of eye contact, rinse eyes with clean water for at least 15 minutes.
- In case of skin contact, wash immediately.
Pool tile adhesive standard
BS EN 12004 – ASTM C482 standard
Reviews
There are no reviews yet.