PROOFAB Anaerobic Gasket Makers
Description
Description : Profab liquid Teflon washer
Anaerobic washer liquid teflon is an advanced single-component, solvent-free product that is formulated and produced for sealing and preventing leakage, as well as as a locking device in the connection of metallic or non-metallic assemblies.
Features and benefits:
- Provides impermeability at low pressure even immediately after implementation
- Flexible and no drips
- Resistant to vibration
Application:
- Fuel and water pumps, bearing boxes, engine thermostat, air compressor, various combined pumps, fuel tanks and…
Technical specification table:
| State of | Viscous liquid |
| Color | Light orange |
| Corrosion rate | Zero |
| Durability | 24 months |
| Special Weight | 1/08 |
| Temperature range | -50°C / 150°C |
| Viscosity | 1000 to 10000 cps |
Packing :
Packing :
50 ml:
12 pieces per box
6 boxes per carton
Product Description – Profab Liquid Teflon Washer
Teflon Liquid Gasket Maker is a product for threaded connections and is solvent-free and produced with an advanced and modern method. Teflon Liquid Gasket Maker is an airless (anaerobic) adhesive and reacts if exposed to air flow and becomes very resistant. This product is a single-component product and is used to prevent leakage and can also be used in metal and non-metal connections. When Teflon Liquid Gasket Maker is applied between two metal surfaces, where oxygen contact is eliminated, polymerization begins and causes a polymer layer to form that is resistant to vibration and pressure, or so-called gasket making.
One of the features of Profab’s liquid Teflon gasket maker is its sealing, which makes it highly resistant to vibrations and shaking, and is considered one of the best seals. This product is specially formulated and produced for use as a seal and fixing metal, plastic, and polyethylene connections and metal-clad parts.
Overall, this type of liquid Teflon is a versatile material with a wide range of applications in many industries. Its unique properties, including chemical resistance and temperature tolerance, make it valuable for various applications. This product is invulnerable to most materials, including those containing water or oil. This Teflon is impermeable to water. Finally, this Teflon can be used as a sealant to prevent leakage or to provide chemical resistance.
Teflon packaging for gasket making liquid
50 ml bottle
Box of 12
Consumption of liquid Teflon for washers
It depends on the desired cross-section as well as the size of the applicable screw.
Maintaining Teflon Liquid Gasket Maker
Duration: Two years in original packaging.
Conditions: Away from cold and frost, heat and direct and prolonged sunlight.
Best storage temperature: +10 to +30 degrees
How to use Teflon liquid for washers
- First, when connecting the parts, be sure to clean them so that there is no grease, oil, or fat on their surfaces.
- In the next step, apply the Teflon washer fluid through the nozzle outlet, rotating 360 degrees on the teeth one to three of the male and the first female.
- To assemble, rotate the parts inside each other by hand without tools, and wherever it stops is enough.
- Finally, it is necessary to store the assembled parts at a temperature of 22 to 24 degrees Celsius for at least 24 hours before they become usable. The time stated depends on the size and smallness of the joints and is subject to change. To ensure the appropriate time for use, be sure to read the information on the bottle.
Properties and effects of Teflon liquid washer
- It is completely impermeable even after operation at low pressure.
- It is completely elastic and free of wrinkles.
- It is very durable against vibration.
- It has the right density without leakage.
- It has excellent and definitive sealing capabilities even after tightening the first few threads.
Applications of Teflon liquid gasket maker
- Can be used in fuel and water pumps, bearing boxes, engine thermostats, air compressors, various combination pumps, fuel tanks, etc.
- It provides sealing of all metal-to-metal and non-metallic core and gear connections.
- It is very suitable for withstanding various temperature fluctuations after implementation.
- It has the ability to connect and seal metal to plastic joints.
Table of physical and chemical properties of liquid Teflon
| Mode | Viscous liquid |
| Color | Pale orange |
| Corrosion rate | Zero |
| Durability | 24 months |
| Specific gravity | 1/08 |
| Temperature range | +150 degrees to -50 degrees Celsius |
| Viscosity | 10000cps to 6000 |
Mechanism of action of Teflon gasket liquid
The mechanism of operation of liquid Teflon gasket-making is that after the liquid is applied between two pieces of Teflon and the oxygen is cut off, polymerization begins and causes the formation of a layer that is stable against vibration, or so-called gasket-making.
Safety tips when using Teflon washer fluid
It is recommended to wear gloves when using.
1) Avoid contact with skin and eyes and if swallowed, consult a doctor immediately. 2) This material is not toxic or dangerous to humans or the environment. 3) In case of contact with eyes, rinse immediately with fresh water and consult a doctor.
Reviews
There are no reviews yet.