Power screw leveler

Power screw leveler consumption

What is the correct amount of power screw leveling?

The amount of tile leveling screw used in the intended environment for tiling is determined by the dimensions of the ceramic tile and the surface area. Smaller ceramic tiles require fewer power tile levelers on each side. However, larger sizes require more levelers on each side.

• Number of power screw leveling tiles required for ceramic tiles with dimensions of 30*30 cm:

The number of tile alignment screws required for small tiles such as 30×30 tiles or smaller is one on each side of the tile. Note that in cases where one tile alignment screw is placed on each side of the tile, the tile alignment screw should be placed in the middle of each side. In small tiles, one tile alignment screw can be placed at the intersection of tiles or ceramics to increase accuracy.

• Number of power screw leveling tiles required for ceramic tiles with dimensions of 40*40 and 50*50 centimeters:

In ceramic tiles with dimensions of 40*40 to 50*50 cm, the number of screw tile levelers used on each tile face is 2. It is recommended that the leveling location for these dimensions of ceramic tiles be 10 cm from the edges of the ceramic tiles. In these dimensions, one screw leveler can be placed in the center of the tile face and one screw leveler can be used at the intersection of the tiles.

• The number of power screw leveling tiles required for dimensions of 60*60 to 80*80 centimeters:

The number of Power Screw Tile Levelers required for this size is 3 on each side of the ceramic tile. Two Power Screw Tile Levelers are placed 10 centimeters from each edge of the ceramic tile, and the third leveler is placed in the center of the desired side.

• The number of times a power screw tile leveler is required for tiles and ceramics with dimensions larger than 80*80 centimeters:

In larger sizes, one power screw leveler should be used for every 20 to 25 centimeters of the length of each side.

How to use the Power Screw Leveler

How to use the Power Screw Aligner?

First, apply tile installation mortar or tile and ceramic adhesive to the surface. Attach the first tile or ceramic in the desired location. According to the desired joint distance for the distance between two tiles, place a tile cross of the desired size between the joints. According to the dimensions of the tile and ceramic, place the required number of power screw tile and ceramic alignment clips. Place the ceramics on both sides and fasten the power screw alignment nut or wedge on the clips and twist as much as possible so that the tiles and ceramics are aligned with each other. After the tile installation mortar or tile and ceramic adhesive reaches its initial setting, the power screw alignment clip is broken and separated by applying a blow with the tip of a shoe or hammer sideways. After collecting the power screw tile and ceramic alignment clips and wedges, the joints are pulled and after drying, the structure is ready for use.

Power Screw Leveler – Advanced Tile & Ceramic Leveling System

The Power Screw Leveler is an innovative tile leveling tool specifically designed to increase precision, alignment, and efficiency in ceramic and tile installation projects. This system consists of two essential components: a clip (screw) and a nut (wedge). Compared to traditional leveling systems, this model stands out for its robust construction and superior mechanical grip. The design of the ribbed threads and pitch of the screw has been carefully engineered to allow for maximum locking power and smooth tightening by hand.

This product is developed and manufactured by Beton Plast Chemical Co., leveraging advanced materials and cutting-edge production techniques to ensure durability and high-performance results for professional tilers and contractors.

Key Properties & Functional Effects

• Ensures precise leveling between adjacent tiles, creating an even and professional finish.
• Minimizes tile movement and settling during the curing phase of adhesive or mortar.
• Significantly reduces the need for rework such as re-leveling or grinding.
• Engineered for easy hand-tightening without the need for any additional tools or pliers.
• Compatible with a wide range of tile thicknesses (especially ≥ 8 mm).
• Prevents lippage (height difference between tiles), which is crucial for floor safety and aesthetics.

Applications

• Suitable for both residential and commercial flooring projects.
• Ideal for porcelain, ceramic, and stone tiles on both wall and floor surfaces.
• Perfect for large-format tiles that require consistent alignment across expansive surfaces.
• Provides cost-effective long-term results by reducing waste and installation time.

Why Choose Power Screw Leveler?

The Power Screw Leveler is one of the strongest and most reliable systems available in the market. Unlike traditional flat wedge systems, this screw-type system doesn’t require a special plier, simplifying the installation process and saving time. The nut (wedge) component is permanent and made from reinforced, impact-resistant plastic to allow for repeated use, while the clip component is disposable and designed to snap off cleanly after setting.

This system empowers tilers to work faster and more confidently, especially on high-end or large-scale tile installation projects. Its ergonomic design and easy application make it ideal for both professional contractors and DIY home renovators who seek a flawless surface finish with every install.

Installation Instructions – How to Use the Power Screw Aligner

1. Prepare the surface by applying tile mortar or adhesive evenly.
2. Place the first tile and determine your desired joint spacing.
3. Insert a tile spacer between joints as needed.
4. Slide the Power Screw Clip under the tile edges at the selected alignment points.
5. Position the adjacent tile, ensuring the clip remains between them.
6. Hand-tighten the Power Screw Nut on the protruding screw thread until both tiles are perfectly aligned.
7. Allow adhesive to reach its initial set (according to the product specifications).
8. Snap off the exposed portion of the clip using a lateral kick or a rubber mallet.
9. Collect and clean the reusable nuts for future use.

Packaging Information

Product Name	Size/Type	Quantity per Package
Power Screw Leveler (Set)	20 Clips + 60 Wedges	50 Packs
Power Screw Clips Only	–	100 Pieces per Box
Power Screw Wedges Only	–	30 Pieces per Box

Each package is tailored to offer flexibility for single-use or repeat-use scenarios, making it easy to scale according to project size and frequency of usage.

Pro Tips for Power Screw Leveler Users

• Only use this system for tile thicknesses of 8 mm or more to ensure proper functionality.
• Avoid using with parquet or extremely thin tiles.
• When removing the clips after curing, ensure the adhesive is fully set to prevent tile misalignment.
• Clean and store the reusable nuts after every use to extend their lifespan.
• Calculate clip-to-nut ratios carefully. Since nuts are reusable, you will require fewer of them relative to disposable clips.

For example:

• For tiling a 500 m² surface in four phases, purchase one-fourth the number of nuts compared to clips.
• For tiles sized 30×30 cm, use 1 leveler per side.
• For tiles sized 50×50 cm, use 2 per side, ideally 10 cm from the edge.
• For tiles 60×60 cm to 80×80 cm, use 3 levelers per side.
• For tiles larger than 80×80 cm, use one leveler every 20-25 cm.

Conclusion

The Power Screw Leveler offers a modern, efficient, and accurate solution for leveling tiles and ceramics. It replaces traditional systems with a more powerful and ergonomic design, helping professionals deliver perfect, seamless finishes across floors and walls. Designed for durability and ease of use, this system has set a new standard in tile installation.

If you’re looking for reliability, reusability, and a high-quality finish, the Power Screw Leveler is your go-to solution.