Porcelain Cement Adhesive
Description
Description: Porcelain Cement Adhesive
It is based on cement and copolymer resins. It consists of cement, granulated silica aggregates, powdered polymers and other natural and mineral modifiers. The polymers synthesized in this product increase the adhesion and strength of installing tiles and ceramics. with high dimensions. Also, this glue has a high resistance against static water and is suitable for use in installing tiles in swimming pools and water storage tanks.
Features and benefits:
- Resistant to moisture and dampness
- High flexibility
- High strength, resistance and adhesion
- No loss of volume and cracking
Application:
- Installing all kinds of ceramic tiles on different surfaces
- Installation of ceramic tiles on surfaces that are in direct contact with water and moisture
- The ability to install tiles on tiles
Technical specification table:
| Color | Gray |
| State | powder |
| Specific gravity | 1/65gr/cm3 |
| Chlorine Ion | Not have |
| Operational time | Maximum 60 minutes |
| Gel time | 20 minutes |
Packing :
20 kg bag
Product Description – Porcelain Ceramic Adhesive
Porcelain ceramic adhesive is based on cement and copolymer resins, which consists of cement, granulated silica aggregates, and also includes powdered polymers and other natural and mineral modifiers. The polymers synthesized in the special porcelain adhesive increase the adhesion and installation strength of large-sized tiles and ceramics. Porcelain adhesive has high resistance to standing water and is suitable for installing tiles in pools and water storage tanks. Porcelain tile adhesive is easy to use and has the ability to be applied quickly.
Porcelain ceramic adhesive has the lowest water absorption and is also highly resistant. One of the features of porcelain cement adhesive is its lighter weight compared to similar products. In fact, waterproof porcelain adhesive can be used to install all types of tiles, mosaics, and ordinary porcelain and ceramics, and it allows tiling on all vertical and horizontal surfaces.
Standard porcelain adhesive is a special type of adhesive used for installing porcelain tiles and ceramics. Porcelain ceramics, due to their special properties such as low water absorption and high hardness, require an adhesive that can support their properties. Porcelain powder ceramic adhesive is suitable for this type of ceramics due to its special properties. After drying, the special porcelain adhesive provides high strength and is able to withstand the heavy weight of porcelain ceramics.
Porcelain ceramic adhesive packaging
20 kg bag
Consumption of porcelain ceramic adhesive
Typically, 2.5 kilograms is enough for one square meter.
Maintaining porcelain ceramic adhesive
Duration: Six months in original packaging.
Conditions: Away from cold and frost, heat and direct and prolonged sunlight.
Best storage temperature: +10 to +30 degrees
How to use porcelain ceramic adhesive
- The desired surface must be completely clean and free of any contamination, loose spots, grease, etc.
- First, pour the required amount of water into a container, then continue mixing using a suitable mechanical mixer until a uniform, lump-free product is achieved.
- After mixing and achieving a homogeneous product, let the product rest for 5 minutes and then continue mixing.
- Apply the prepared paste to the surface using notched trowels.
Properties and effects of porcelain ceramic adhesive
- Resistant to moisture and humidity
- High flexibility
- High strength, resistance and adhesion
- No volume loss or cracking
- Easy to use and high speed of execution
- Slip resistant
Application of porcelain ceramic adhesive
- Installing various types of tiles and ceramics on various surfaces
- Installing ceramic tiles on surfaces that are in direct contact with water and moisture
- Ability to install tiles on tiles
Table of physical and chemical properties of porcelain ceramic adhesive
| Title | Feature |
| Mode | Powder |
| Color | White – Gray |
| Specific gravity | 1/65g/cm3 |
| Gel Time | Maximum 30 minutes |
| Initial setting | 20 hours |
| Workability time | Maximum 60 minutes |
| Chlorine ion | No |
Mechanism of action of porcelain ceramic adhesive
Porcelain tile adhesive is a powder that is formulated and produced from cement, copolymer resins, and micronized fillers. After mixing with water, it becomes an adhesive mortar and is used to adhere various types of tiles and ceramics to various surfaces. The presence of cement and copolymer resins in the formulation ensures ideal adhesion to the underlying surfaces. Also, for very sensitive surfaces that require more adhesion, you can add tile adhesive reinforcement to the porcelain mortar and use it.
Porcelain ceramic adhesive safety tips
- This product is not a toxic or environmentally hazardous substance.
- Due to its alkaline properties, it is recommended to use goggles and gloves when working with it.
- In case of skin contact, wash with soap and water.
- In case of contact with eyes, rinse immediately.
Reviews
There are no reviews yet.