Concrete Fast Harden Mortar
Description
Description : Concrete Fast Harden Mortar
Ani-Gir Concrete is a type of ready-made cement-based mortar that is used in cases where the concrete structure has severe leakage. This material hardens in less than 10 seconds by accelerating the hydration reaction. Water drips and passes.
Features and benefits:
- No corrosion formation in steel
- Quick grip and the possibility of quick use of the structure
- Permanent sealing
- Excellent adhesion to all types of materials including concrete, stone, brick
Application:
- Suitable for blocking and fixing leaks under pressure in non-shrinking seams and holes
- Immediate stoppage of any water or liquid leakage from the concrete structure
- Preventing water leakage in reservoirs and sources, in situations where it is not possible to drain.
- Sealing of all types of concrete structures, including: tunnels, dams and concrete tanks, underground and buried structures, elevator pits
Technical specification table:
| Powder state | Gray |
| Specific gravity | 2/15 gr/cm3 |
| Standard | ASTM C928 |
| PH | 12 |
| Chlorine Ion | Not have |
Packing :
20 kg bag
Product Description Instant Concrete Setting Agent
Ready-to-use construction mortar with instant setting properties
Immediate blockage of leaks
Instant concrete sealer is a type of ready-mixed cement-based mortar that is used in cases where a concrete structure has severe leaks. This material hardens in less than 10 seconds by accelerating the hydration reaction and preventing water from dripping and passing through. In fact, it is a type of waterproofing material without delay that, after mixing with water, creates a powerful paste mortar for instantly blocking high-pressure leaks. This material can be applied to all types of concrete and stone surfaces. Given that the expansion coefficient of instant concrete sealer is equal to the expansion coefficient of concrete, it will have a life equal to the life of the concrete structure. Also, using this product prevents water leakage in tanks and sources in situations where it is not possible to drain.
Instant setting is one of the most widely used products in concrete sealing in construction projects. The importance of instant setting powder becomes clear when you know that none of the concrete sealing products have such a property and you know that it is an instant setting powder or mortar that prevents water leakage very quickly. Also, its properties increase when it comes into contact with water. Structurally, instant setting powder can be used on new and old surfaces.
This product is a type of additive or adhesive that is used to bond concrete parts to each other or to other surfaces. This product is presented in the form of powdered adhesives that can be used to connect concrete components together. One of the most important features of instant adhesive is the speed of project implementation. This product has high adhesion properties, good mechanical strength and the ability to function in various water and humidity conditions.
Instant concrete packaging
20 kg bag
5 kg package
Standard usage rate of instant concrete admixture
The amount of use is determined based on the capacity of the hole or the depth of the groove and by knowing the specific gravity of the instant concrete setting material in the paste state. However, it can be said that for one square meter with a thickness of 5 mm, about 6 kilograms of this material are used.
Method of maintaining instant concrete setter
Duration: One year in original packaging.
Conditions: Away from cold and frost, heat and direct and prolonged sunlight.
Note: Due to the presence of quick-setting and moisture-sensitive materials, be sure to store in a dry place.
Best storage temperature: +10 to +30 degrees
How to use instant concrete correctly
Preparation:
- For every kilogram of instant setting powder, 250 to 300 grams of water is required to make waterproof mortar.
- Make the surface intended for applying the instant adhesive free of any dirt, grease, loose materials, and waste.
- Create a V-shaped seam on the surface where the concrete is to be applied.
- After the instant set and the leak is fixed, sand the unevenness to level it with the previous surface.
- Hold the prepared mortar on the joint for 15 seconds. It is best to fill the pleural joint from the edges towards the center of the joint.
- The best way to perform instant concrete setting is by hand (with gloves).
- Always mix an amount of instant hardener with water that can be used in less than 25 seconds.
- Always add the powder to the water. If mixed in the opposite direction, the dough will quickly become hard and unusable.
- If the water pressure is high, drain it by inserting a narrow pipe and then seal around it with instant mortar.
- The time and speed of setting of the instant hardener depends on the temperature of the water, the environment, and the instant hardener powder.
- Environmental conditions have a significant effect on the speed of setting. Cold weather will delay setting, and warm weather will speed it up.
- The instant setting time of the powder starts after 15 seconds and finally hardens completely after 3 minutes.
- In areas where there are large seams, it is best to seal from the top down.
- If there is no water leakage during application, first moisten the surface and then apply the mortar, and keep the applied mortar moist for 15 minutes after application.
Properties and effects of instant setting concrete on the construction level
- No corrosion formation in steel
- Fast setting and possibility of quick operation of the structure
- Permanent and permanent sealing
- Excellent adhesion to a variety of materials including concrete, stone, brick
- Does not cause pollution when in contact with drinking water
- Maintaining quality throughout the life of the structure in use
- Lack of chlorine ions
- No shrinkage or cracking
- Ready-to-use mortar, easy to mix with water
Applications of instant setting concrete
- Suitable for blocking and eliminating leaks under pressure in non-shrink joints and cavities.
- Instantly stop any water or liquid leakage from the concrete structure
- Preventing water leakage in tanks and sources, in situations where drainage is not possible.
- Waterproofing of all types of concrete structures, including: tunnels, dams and concrete tanks, underground and buried structures, elevator shafts…
- Sealing joints and channels for water and liquids to pass through concrete and stone sections
- Suitable for sealing pools, water pipes and canals
- Suitable for blocking leaks from fuel and petroleum storage tanks
Physical and chemical properties of instant setting concrete
| Title | Feature |
| Mode | Powder |
| Color | Gray |
| Specific gravity | 2/15gr/cm3 |
| Chlorine ion | No |
| PH | About 12 |
Mechanism of action of instant concrete setting product
Instant concrete powder is a single-component powder created from cement, quick-setting and quick-hardening materials and sealing additives, which, due to the presence of quick-setting chemicals, further stimulates the hydration process and will cause the cement to complete its hydration process in the first moments of mixing with water and finally achieve rapid and controlled setting, which will be immediate setting, along with maintaining early mechanical properties. In fact, the presence of developed cement compounds and finally creating a change in the behavior of cement in contact with water, which has resulted in rapid and final setting, against all types of rapid water leakage and penetration, due to the use of special minerals in the synthesis of instant concrete.
Instant concrete safety
- It is an alkaline accelerator and also contains cement.
- This material is not considered hazardous or harmful to health or the environment.
- If swallowed, seek medical attention immediately.
- It is definitely recommended to wear gloves, goggles, work clothes, and a mask when using it.
Instant setting concrete standard
According to which standards is concrete agitator produced?
ASTM C928 standard
Reviews
There are no reviews yet.