Blocks Cement Adhesive
Description
Description: Blocks Cement Adhesive
Based on cement and mineral powders, specially for powders and additives, in order to increase the adhesive strength of aerated concrete blocks, increase the level of the wall, increase the work speed, reduce the weight of structures and the mortar required for porcelain blocks up to 75%, water retention . In mortar, reducing the required thickness of the mortar, compressing the structure, easy application and reducing water consumption have been formulated and produced.
Features and benefits:
- Preventing heat loss from the place of sand and cement mortar
- Increasing the speed of installing parts
- Much higher adhesive strength than ordinary mortars
- Implementation with low thickness for gluing
Application:
- Use in building blocks
- Sticking the bookcases and styles
- Suitable for fan blocks
- Suitable for gluing cement pieces together
Technical specification table:
| Color | White – Gray |
| State | Powder |
| Specific gravity | 1/7 gr/cm3 |
| Chlorine Ion | Not have |
| Operational time | Maximum 30 minutes |
| Gel time | 20 minutes |
Packing :
20 kg bag
Cement block adhesive and Heplex
Block adhesive is a product based on cement and mineral powders, powdered resins and special additives, formulated and produced to increase the durability of the adhesion of aerated concrete blocks, increase the levelness of the wall, increase the speed of construction, reduce the weight of the structure and mortar required for laying the block by up to 75%, retain water in the mortar, reduce the required thickness of the mortar, compact the structure, be easy to use and reduce water consumption. This product is suitable for bonding AAC blocks, light and heavy cement blocks, clay, brick, etc. and has been introduced to the market. One of the features of Heplex adhesive is that it is non-flammable, and it also has the ability to ensure the safety of the structure against flammable materials. Using this product in the construction of walls with light blocks increases the resistance of the wall, which is very important in the discussion of building reinforcement.
In general, the use of this product prevents the increase in the weight of the building. In other words, it can be said that it is a product that is used instead of cement mortar in a porcelain wall with Heplex blocks. This product also has the ability to be a multi-purpose connector.
This product is a type of tile adhesive used to bond cement blocks and lightweight Heplex blocks. This product is specifically formulated to increase construction speed, reduce the amount of mortar used, and improve the thermal and acoustic performance of walls.
Block adhesive packaging
20 kg bag
Consumption of cement block adhesive and Heplex
The amount of Heplex adhesive required for a project depends first on the area and then on the thickness of the Heplex blocks. Generally, a minimum of 1.5 and a maximum of 4 kg of adhesive powder is used for each square meter. However, this amount varies depending on the type of structure, the type of blocks, and the climate of the construction site.
Maintaining block, cement, and Heplex adhesives
Duration: Six months in original packaging.
Conditions: Away from cold and frost, heat and direct and prolonged sunlight.
Best storage temperature: +10 to +30 degrees
How to use block glue
Each 20 kg bag of block adhesive should be mixed with 5 to 6 liters of water using an electric mixer.
Slowly add the powder to the water and mix until a uniform, homogeneous mixture is achieved.
Let the mortar rest for 5 minutes and after a little mixing, it is ready to use.
Using a trowel, apply the adhesive to the desired surface and install the blocks within 20 minutes.
Properties and effects of cement block adhesive and Heplex
- Preventing heat loss from the sand and cement mortar area
- Easy to use and fast to execute
- Much higher adhesion strength than conventional mortars
- Low-thickness execution for gluing
- Cost-effective ready-mix mortar without the need to add any additional ingredients
Application of cement block adhesive and Heplex
- Use in building blocks
- Gluing of heplex and light blocks
- Suitable for ventilated blocks
- Suitable for gluing cement pieces together.
Physical and chemical properties of block adhesive
| Title | Feature |
| Mode | Powder |
| Color | White – Gray |
| Specific gravity | 1/7g/cm3 |
| Gel Time | 20 minutes |
| Workability time | Maximum 60 minutes |
| Chlorine ion | No |
Important safety issues for cement block adhesive and Heplex
- The use of glasses and gloves is mandatory.
- In case of eye contact, rinse with clean water for at least 15 minutes.
- In case of contact with skin, wash immediately.
Reviews
There are no reviews yet.