Antique stone adhesive
Description
Description: Antique stone adhesive
Powdered antique stone adhesive is formulated based on synthetic polymers and micro mineral powders. This adhesive is suitable for installing decorative stones, antique stones and bricks on horizontal and vertical surfaces. Because it prevents cracking and breaking stones and bricks due to expansion and contraction of the building.
Features:
- High strength, strength and adhesion without volume loss and cracking
- Maintains adhesion against moisture and moisture
- Resistant to slip and limited structural seismic
Applications:
- Installation of artificial stones on different surfaces
- Installing stone on surfaces that are directly in contact with water and moisture
- Ability to install stone and brick in the interior and exterior of the building
Technical specification table:
| Appearance | powder |
| Color | Grey-white |
| Specific gravity | 1/7 gr/cm3 |
| Initial set | 24 hours |
| Final set | 7 days |
Package:
20kg bag
Product Description – Powdered Antique Stone Glue
Powerful adhesive based on cement and special resins
This product is a good choice for installing decorative stones and is formulated, produced and marketed based on synthetic polymers and micro-mineral powders and is very suitable for installing antique stone and brick on vertical surfaces. Easy to use and flexible, it is one of the best adhesives for use in indoor environments for installing antique stone and brick. The presence of chemical additives in this product makes it flexible after hardening and prevents antique stone and brick from breaking or cracking due to expansion and contraction of the building. This product is also easy to use and has the ability to be implemented quickly.
In general, the product has a very high adhesive strength, and can be used on various vertical and horizontal surfaces. In fact, in order to install and keep the stone in the specified place, an adhesive is needed that has high bonding strength, low density, and high durability, which is why the product in question has been presented.
This product is a type of adhesive that is offered to the market in powder form and is used to install antique stones, tiles and ceramics on walls and floors. The desired product must be mixed with water to become a usable mixture. This adhesive also has high adhesion and strength properties. The desired product is easily mixed with water and can be applied to the desired surface using a trowel or spatula.
Packaging of powdered antique stone adhesive
20 kg bag
Dosage of powdered antique stone adhesive
The amount of powdered antique stone adhesive used depends on the condition of the surface being worked on (porosity and roughness of the surface).
Learn more; Porcelain ceramic adhesive
Maintaining powdered tile adhesive
Duration: Six months in original packaging.
Conditions: Away from cold and frost, heat and direct and prolonged sunlight.
Best storage temperature: +10 to +30 degrees
How to use antique stone powder adhesive
- The desired surface must be free of any contamination, dust, oil, etc.
- Spread the decorative stone paste adhesive onto the surface with a spatula.
- Each packet should be mixed with 5 to 6 liters of water using an electric mixer.
- Slowly add the powder to the water and mix until a uniform, homogeneous mixture is achieved.
- Give the mortar a rest for 5 minutes and after a little mixing, the mortar is ready to use.
- Using a notched trowel, apply the adhesive to the surface and install and fix the tile within a maximum of 20 minutes.
Properties and effects of powdered Attic stone adhesive
- High strength, resistance and adhesion without volume loss or cracking
- Reducing operational costs
- Maintaining adhesion against moisture and humidity
- Resistant to temperature changes after drying.
- Moisture resistant after setting
- Easy to mix with water
- No need to mix any additional ingredients
- Easy to use and high speed of execution
- Resistant to slippage and limited structural vibrations
Applications of powdered antique stone adhesive
- Installing various types of artificial stones on different surfaces
- Installing stone on surfaces that are in direct contact with water and moisture
- Suitable for installing porcelain and granite ceramic tiles that have low water absorption properties.
- Ability to install stone and brick inside and outside the building
- Suitable for installing all types of coatings on cement, concrete and stone surfaces.
Physical and chemical properties table
| Title | Feature |
| Mode | Powder |
| Color | White and gray |
| Specific gravity | 1/7g/cm3 |
| Workability time | Maximum 30 minutes |
| Initial setting | 24 hours |
| Final grip | 7 days |
| PH | About 8 |
Mechanism of action of powdered antique stone adhesive
Among the various stone working materials, powdered antique stone adhesive is formulated and supplied based on cement, copolymer resins and micronized fillers, which when mixed with water becomes an adhesive mortar for bonding various types of stone and brick on various surfaces. The presence of cement and copolymer resins in the formulation of powdered antique stone adhesive ensures ideal adhesion to the underlying surfaces. Also, the presence of dispersing agents in the structure of this product allows for more open time (gel time) to be available for installing stone and brick.
Safety when using powdered antique stone adhesive
- This product is not a toxic or environmentally hazardous substance.
- Due to its alkaline properties, it is recommended to use goggles and gloves when working with it.
- In case of skin contact, wash with soap and water.
- In case of contact with eyes, rinse immediately.
Reviews
There are no reviews yet.